What is a smart lawn mower? How does it work?

The main components of the intelligent lawn mower: body, charging stand, border line, adapter, remote control.

    Mowing mode setting

Random straight line mode: When the mower walks in a straight line and cuts the grass at random, when it encounters the boundary line, it will automatically turn 90 degrees, then walk in a straight line, and continue to mow. Walk in a straight line to mow the grass, repeat in turn, avoid repetition of the walking path as much as possible, and achieve the highest mowing efficiency. Mowing efficiency: An average of about 130 square meters can be cut in one hour. Involute mode: The lawn mower starts with a position as the starting point and starts to walk an arc with a radius of 0.5m. The radius of the arc gradually increases to realize the involute mode of mowing. This mode is suitable for small area mowing under manual remote control.

   Main functions of lawn mower

  1 Appointment timing mowing: It can be set to mowing on any day or several days of the 7 days a week, and the appointment time can be adjusted between 00-24 hours (but the appointment start time must be earlier than the appointment stop time). The machine will automatically go out to mow at the scheduled start time, stop mowing at the scheduled stop time, and automatically return to the charging center.

2Automatic charging function When the machine is mowing, if the battery is low, it will automatically turn off the mowing motor and return to the charging center for charging.

3 Automatic rain protection function The machine has a built-in rain detection sensor. After detecting rain, the machine will automatically return to the charging center to avoid rain. Unless the next appointment time comes or manual operation, the machine will no longer work.

4 Remote control function To make the machine more convenient to use, we provide the machine with a remote control function, which allows the user to switch the mowing mode and control the mowing direction of the machine, making the machine more user-friendly.

5Automatic barrier deceleration. The machine has a built-in infrared sensor detection system. When the front side encounters an obstacle, it will automatically decelerate and walk so that the machine avoids impact.

6 Alarm when the angle of inclination exceeds 30 degrees When the four inclination angles of the front, rear, left, and right of the machine are greater than 30 degrees (30±10 degrees), the machine will stop after 2 seconds and start to alarm, and "ERROR 5" will be displayed on the display.