Page 13 - Machine installation instructions
P. 13
≥1.5m
≥1.5m
25-45cm
25-45cm
≥1.5m
≥1.5m
≥2m
≥2m
25-45cm
25-45cm
≥2m
≥2m
≥2m
≥2m
25-45cm
25-45cm
≥2m
≥2m
1
25-45cm
≥2m
≥2m
25-45cm
No obstacles
h<3cm
≥2m
≥2m
≥2m
≥2m
No obstacles
h<3cm
W>0.5L
≥2m
≥2m
EN 1 R=1.5m W>0.5L R=1.5m L<5m L<5m
F. The charging station is within 10 m of the power source. Install the charging station =30±5cm =30±5cm
G. There is no strong magnet around the charging station. A. Nail the charging station with pegs.
Location of the charging station
A. The charging station can be placed inside the lawn.
The charging station should be within a range of 25~45
cm from the boundary, with no obstacles within 2 m of the
front of the charging station within the lawn. The distance
from the back of the charging station to the boundary
should not be less than 1.5 m.
B. Connect the power charger and wire to the power
≥1.5m ≥1.5m supply. If there is a certain distance from the charging
station and the power supply, fix the charging wire
properly on the ground and wall to ensure a safe operation.
25-45cm 25-45cm
≥2m ≥2m
≥1.5m ≥1.5m
≥2m ≥2m
B. The charging station can be placed in the corner of the
25-45cm
25-45cm
25-45cm
lawn. The charging station should be within a range of 25-45cm
25~45 cm from the boundary. The distance from the front 1
≥2m
≥2m
of the charging station to the boundary should not be less
≥2m
≥2m
than 2 m. R=1.5m
No obstacles
h<3cm
4.3 Install the Magnetic Tags
≥2m ≥2m
≥2m ≥2m
Scenario
25-45cm
25-45cm W>0.5L L<5m
1
If you have more than one zone, then you may need to
install the magnetic tags in each zone. It allows the robotic
≥2m ≥2m R=1.5m
No obstaclese are more than
mower move from zone 1 to zone 2. If ther
two working areas, you will need a pair of additional tags.
h<3cm
≥2m ≥2m
Find a proper location
≥1.5m ≥1.5m W>0.5L L<5m
≥1.5m ≥1.5m A. Make sure that the distance between area 1 and area 2
=30±5cm
C. The charging station can be placed along the outside (L) does not exceed 5 m. Make sure that the width of the
edge of the lawn. The charging station should be within a pathway (W) is greater than half of distance between area
25-45cm
25-45cm
25-45cm
range of 25~45 cm from the boundary. The distance from 1 and area 2 and there are no obstacles in the pathway.
25-45cm
≥2m
≥2m the front of the charging station to the boundary should B. Make sure that there are no obstacles within a radius of
≥2m
not be less than 2 m. ≥2m 1.5 m around the tags.
≥2m ≥2m C. Make sure that the height of the pathway (h) is less than
≥2m ≥2m 3 cm. =30±5cm
25-45cm
25-45cm
25-45cm 25-45cm
1
≥2m ≥2m R=1.5m 1
≥2m ≥2m No obstacles R=1.5m
No obstacles h<3cm
h<3cm
≥2m ≥2m
≥2m ≥2m
W>0.5L L<5m
W>0.5L L<5m
12
=30±5cm
=30±5cm

