Page 14 - Machine installation instructions

>30cm
≥1.5m
25-45cm
≥2m
≥2m
≥2m
25-45cm
25-45cm ≥2m ≥1.5m 25-45cm Neighbor 0.5 m
1 EN
Install the magnetic tags 0.5 m
≥2m ≥2m
R=1.5m
No obstacles
h<3cm
A. Install the tag 30±5cm away from the boundary. Use >30cm
≥2m ≥2m two screws to fix the tags.
0.5 m >30 cm
B. Put the other tag in another zone and make sure
L<5m
W>0.5L
that the arrow marks on the magnetic tags are pointing
towards each other and symmetrical.
>30 cm
=30±5cm
0.5 m
>30cm
0.5 m

>30cm

0.5 m
4.4 Install the Magnetic Strips
>30cm
Scenario B. If the the magnetic strip is too long, cut off the excess.

When the lawn boundary is challenging to discern visually
(for example, there is no border or boundary between
yours and surrounding lawns), use the magnetic strip
to set a virtual boundary. For example, places like the
following:
A. Flower beds and other areas that need to be protected;
Neighbor
B. Puddles or pits covered with grass;
C. Edges covered with grass, with cliffs and lakes under
the grass;
D. Adjacent lawns; C. If the magnetic strip is not long enough, use a connector
to connect two strips.
E. Slopes higher than 42%.

Neighbor

Neighbor

D. If the magnetic strip is not installed, set a fence or non
grass physical border.
lnstall the magnetic strips
Neighbor
0.5 m >30 cm
A. Place the strip on the ground and secure it every 0.5
m with magnetic strip pegs. Make sure that the distance
between the strips and the protected area is greater than
30 cm. >30 cm

13

>30 cm
0.5 m

>30 cm
0.5 m
>30 cm

>30 cm >30 cm
0.5 m

>30 cm